Radio frequency (often abbreviated as, RF), can be described as any frequency within the electromagnetic spectrum with radio wave propagation that lie in the range extending from about 3 kHz to 300 GHz; this includes the frequencies that are used for communications or the radar signals. That said, you should know that RF generally refers to electrical rather than the mechanical oscillations.
RF communication utilizes radio waves rather than wires to exchange signals, and this is where the term "wireless communication," comes from. RF modules generally use frequencies to distinguish the different radio signals, therefore, in order for the RF modules to communicate, they have to be operating on the same exact frequency. That said, you should know that radio frequency is normally measured in units known as hertz (abbreviated as Hz), which represent number of cycles/second when the r adio wave(s) is transmitted. 1 hertz (Hz) equals 1 cycle/second, and 1 megahertz (abbreviated as, MHz) equals 1 million cycles/second.
A radio frequency (RF) signal basically refers to the wireless electromagnetic signal that's utilized as a form of communication, when talking about wireless electronics. As mentioned earlier, radio waves are a type of electromagnetic radiation which have identified radio frequencies which usually range from about 3Hz to 300 GHz. Not every radio wave is the same; they can be small or big, or they can be far apart or close together. On the radio stations we normally listen to, every station uses waves which are on a slightly different frequency from the other stations. Whenever you happen to switch from one radio station to another, your radio picks up and then plays waves of that particular frequency.
Frequency normally refers to the oscillation rate of the radio waves. It can also refer to how close together or far apart the waves are. When the radio waves are too far apart, that is known as low frequency, and when the radio waves are close together, that is known as high frequency. That said, you should know that radio frequency propagation happens at speed of light, and doesn't need any medium (such as air) in order for it to travel. Radio frequency waves occur naturally from lightning, the sun flares, and even from stars which radiate radio frequency waves as the get older. However, people usually communicate with man made radio waves which oscillate at various select frequencies.
The man made radio frequency waves are produced by oscillating current for a certain number of times, and radiating it off the conductor (which is referred to as the antenna), into an empty space (this is the space that's occup ied by air and not the outer space), as electromagnetic radio waves. The RF signals are received and sent using conductors via the phenomenon that's called the skin effect, where radio frequency current latches itself and then flows through the conductors' surface; this effect is actually the basis and the core of radio technology.
The best thing about RF communication, is that it's omnipresent (that is to mean it's all around us). It plays a crucial role in many of the communications systems which we depend on a daily basis, such as fire and police radio systems, TV and radio broadcasts, and satellite communications. Cordless phones, cellphones, Wireless internet (Wi Fi), and Bluetooth also operate in the radio frequency spectrum. In addition to that, there are other appliances outside of the communications field that use RF. They include; microwave ovens, garage door openers, among others. Some wireless devices such as TV remote controls, cordless computer mice, computer k eyboards, and even 2 way radios also operate using RF frequency.
Two way radios are based on the RF frequency and they perform group communication using minimum radio frequency channel resources. This is to mean that if all the users are in the same location or area (most of the time), you will only need a single channel resource in order to talk to them. By using RF, two way radios have the capability of facilitating “one to many†group communication (which is also known as a group call), very efficiently. By efficient, I mean that 1 user can communicate/talk to 1, 5, 10, 100 or even 1000's of users at a go. The two way radio user doesn’t need to keep on repeating the same message if he/she needs to convey to many users.
Sunday, 14 May 2017
Sunday, 2 April 2017
MIT's new method of radio transmission could one day make wireless VR a reality
VR is the Buzz word for this year, every technology company clambering to get their headset out on to the market. Much of the market needs to catch-up though, the power of home computing needs to improve and removing the inevitable extra cabling and wires that come with current headsets. Luckily this article is about the future technology of VR headsets, see what we can expect as this technology grows.
If you want to use one of today's major VR headsets, whether the Oculus Rift, the HTC Vive, or the PS VR, you have to accept the fact that there will be an illusion-shattering cable that tethers you to the small supercomputer that's powering your virtual world.
But researchers from MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL) may have a solution in MoVr, a wireless virtual reality system. Instead of using Wi-Fi or Bluetooth to transmit data, the research team’s MoVR system uses high-frequency millimeter wave radio to stream data from a computer to a headset wirelessly at dramatically faster speeds than traditional technology.
There have been a variety of approaches to solving this problem already. Smartphone-based headsets such as Google's Daydream View and Samsung's Gear VR allow for untethered VR by simply offloading the computational work directly to a phone inside the headset. Or the entire idea of VR backpacks, which al low for a more mobile VR experience by building a computer that's more easily carried. But there are still a lot of limitations to either of these solutions.
THE MOVR PROTOTYPE SIDESTEPS TETHERED VR ISSUES
Latency is the whole reason a wireless solution hasn't worked so far. VR is especially latency-sensitive, along with the huge bandwidth requirements that VR needs to display the level of high-resolution video required for virtual reality to work. But the MIT team claims that the millimeter wave signals can transmit fast enough to make a wireless VR headset feasible.
The issue with using millimeter wave technology is that the signal needs a direct line of sight, and fares poorly when it encounters any obstacles. MoVR gets around this by working as a programmable mirror that can direct the direction of the signal to the headset even while it’s moving to always make sure the signal is transmitting directly to the headset's receivers.
For now, the MoV R is simply a prototype, with the team hoping to further shrink down the system to allow for multiple wireless headsets in one room without encountering signal interference. But even as a proof-of-concept, it's an interesting perspective on how virtual reality could one day work.
If you want to use one of today's major VR headsets, whether the Oculus Rift, the HTC Vive, or the PS VR, you have to accept the fact that there will be an illusion-shattering cable that tethers you to the small supercomputer that's powering your virtual world.
But researchers from MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL) may have a solution in MoVr, a wireless virtual reality system. Instead of using Wi-Fi or Bluetooth to transmit data, the research team’s MoVR system uses high-frequency millimeter wave radio to stream data from a computer to a headset wirelessly at dramatically faster speeds than traditional technology.
There have been a variety of approaches to solving this problem already. Smartphone-based headsets such as Google's Daydream View and Samsung's Gear VR allow for untethered VR by simply offloading the computational work directly to a phone inside the headset. Or the entire idea of VR backpacks, which al low for a more mobile VR experience by building a computer that's more easily carried. But there are still a lot of limitations to either of these solutions.
THE MOVR PROTOTYPE SIDESTEPS TETHERED VR ISSUES
Latency is the whole reason a wireless solution hasn't worked so far. VR is especially latency-sensitive, along with the huge bandwidth requirements that VR needs to display the level of high-resolution video required for virtual reality to work. But the MIT team claims that the millimeter wave signals can transmit fast enough to make a wireless VR headset feasible.
The issue with using millimeter wave technology is that the signal needs a direct line of sight, and fares poorly when it encounters any obstacles. MoVR gets around this by working as a programmable mirror that can direct the direction of the signal to the headset even while it’s moving to always make sure the signal is transmitting directly to the headset's receivers.
For now, the MoV R is simply a prototype, with the team hoping to further shrink down the system to allow for multiple wireless headsets in one room without encountering signal interference. But even as a proof-of-concept, it's an interesting perspective on how virtual reality could one day work.
Sunday, 19 March 2017
Growth of Global Hearing Amplifiers Market Driven by Increase in the Number of Prevalence of Hearing Impairment Patients in Old and Young Population
We found this article and couldn’t not post this to our blog, it shows how hearing damage is on the upsurge. With cases of hearing loss growing every year, hearing amplifiers and hearing aids sales have consistently increased. There doesn’t seems to be an answer to this rise but as technology improves, answers can come that way.
Hearing loss can occurs when inner ear or nerve is damaged, which may be caused due to diseases, aging, loud noise, and medications. Hearing amplifier is a small part of hearing aid which makes the sound louder. Hearing amplifiers increase the power of signals and then send them to the ear through speakers.
Hearing aid is useful in improving the hearing and speech of patients. An otolaryngologist investigates the cause of the hearin g loss. An audiologist is a hearing health professional who identifies and measures hearing loss and will perform a hearing test to assess the type and degree of hearing loss.
Increase in number of hearing impairment cases coupled with rising costs of hearing aids are expected to drive the growth of the global hearing amplifiers market during the forecast period. Majority of the consumers use hearing amplifiers or personal sound amplification products (PSAPs) as they are considered cheaper alternatives of hearing aids. Hearing amplifiers or PSAPs, are designed to amplify sounds in any recreational environment and are exempt from the Food and Drug Administration (FDA). Hearing amplifiers are sold directly to consumers as electronic devices without the requirement of a physician prescription.
According to National Institute on Deafness and other Communication Disorders (NIDCD), approximately 324,200 cochlear implants have been implanted worldwide. About 15 percent of A mericans (26 million people) between the ages of 20 and 69 have high frequency hearing loss due to exposure to noise at work or during leisure activities. Major driving factors for the growth of the global hearing amplifiers such as an increase in the number of prevalence of hearing impairment patients in old and young population, increasing investment in research and development in ENT field among others.
Based on styles or design types of hearing aid products the global market of hearing amplifiers can be segmented as follows:
-Behind-the-ear (BTE)
-Mini BTE
-In-the-ear (ITE)
-In-the-canal (ITC)
Based on function the global hearing amplifiers market can be segmented as follows:
-Analog hearing aids
-Digital hearing aids
Based on distribution channels the global hearing amplifiers market can be segmented as follows:
-Hospital Pharmacies
-Online Pharmacies
-Independent Pharmacies and Drug stores
Hearing amplifiers market is segmented into five major regions: North America, Europe, Latin America, Asia Pacific, and Middle East & Africa. In 2015, North America lead the global market of hearing amplifiers followed by the Europe in terms of revenue. According to statistics compiled by the National Institute on Deafness and Other Communication Disorders (NIDCD), 37.5 million adults aged 18 and older in America report some form of hearing loss.
According to the National Institute on Deafness and Other Communication Disorders (NIDCD), 28.8 million U.S. adults could benefit from using hearing aids and more than 90 percent of deaf children are born to parents suffering from some kind of hearing disorder. Globally, the hearing amplifiers market is expected to witness a healthy CAGR in terms of revenue during the forecast period.
Latin America, Middle East & Africa and Asia Pacific regions are the emerging markets in the global hearing amplifiers market. Increasing awareness among the various distribution channels as well as consumers in these regions is anticipated to propel global market growth of hearing aids and amplifiers during the forecast period.
The key players in the global market develop hearing amplifiers in analog and digital forms. Some of the top companies in the global hearing amplifiers market are Sound Hawk, Resound, Foshan Vohom Technology Co. Ltd., Sound world solution, Shenzhen LA Lighting Company Limited, Austar Hearing Science and Technology (Xiamen) Co., Ltd., Huizhou Jinghao Electronics Co. Ltd., Ziphearing among others.
Hearing loss can occurs when inner ear or nerve is damaged, which may be caused due to diseases, aging, loud noise, and medications. Hearing amplifier is a small part of hearing aid which makes the sound louder. Hearing amplifiers increase the power of signals and then send them to the ear through speakers.
Hearing aid is useful in improving the hearing and speech of patients. An otolaryngologist investigates the cause of the hearin g loss. An audiologist is a hearing health professional who identifies and measures hearing loss and will perform a hearing test to assess the type and degree of hearing loss.
Increase in number of hearing impairment cases coupled with rising costs of hearing aids are expected to drive the growth of the global hearing amplifiers market during the forecast period. Majority of the consumers use hearing amplifiers or personal sound amplification products (PSAPs) as they are considered cheaper alternatives of hearing aids. Hearing amplifiers or PSAPs, are designed to amplify sounds in any recreational environment and are exempt from the Food and Drug Administration (FDA). Hearing amplifiers are sold directly to consumers as electronic devices without the requirement of a physician prescription.
According to National Institute on Deafness and other Communication Disorders (NIDCD), approximately 324,200 cochlear implants have been implanted worldwide. About 15 percent of A mericans (26 million people) between the ages of 20 and 69 have high frequency hearing loss due to exposure to noise at work or during leisure activities. Major driving factors for the growth of the global hearing amplifiers such as an increase in the number of prevalence of hearing impairment patients in old and young population, increasing investment in research and development in ENT field among others.
Based on styles or design types of hearing aid products the global market of hearing amplifiers can be segmented as follows:
-Behind-the-ear (BTE)
-Mini BTE
-In-the-ear (ITE)
-In-the-canal (ITC)
Based on function the global hearing amplifiers market can be segmented as follows:
-Analog hearing aids
-Digital hearing aids
Based on distribution channels the global hearing amplifiers market can be segmented as follows:
-Hospital Pharmacies
-Online Pharmacies
-Independent Pharmacies and Drug stores
Hearing amplifiers market is segmented into five major regions: North America, Europe, Latin America, Asia Pacific, and Middle East & Africa. In 2015, North America lead the global market of hearing amplifiers followed by the Europe in terms of revenue. According to statistics compiled by the National Institute on Deafness and Other Communication Disorders (NIDCD), 37.5 million adults aged 18 and older in America report some form of hearing loss.
According to the National Institute on Deafness and Other Communication Disorders (NIDCD), 28.8 million U.S. adults could benefit from using hearing aids and more than 90 percent of deaf children are born to parents suffering from some kind of hearing disorder. Globally, the hearing amplifiers market is expected to witness a healthy CAGR in terms of revenue during the forecast period.
Latin America, Middle East & Africa and Asia Pacific regions are the emerging markets in the global hearing amplifiers market. Increasing awareness among the various distribution channels as well as consumers in these regions is anticipated to propel global market growth of hearing aids and amplifiers during the forecast period.
The key players in the global market develop hearing amplifiers in analog and digital forms. Some of the top companies in the global hearing amplifiers market are Sound Hawk, Resound, Foshan Vohom Technology Co. Ltd., Sound world solution, Shenzhen LA Lighting Company Limited, Austar Hearing Science and Technology (Xiamen) Co., Ltd., Huizhou Jinghao Electronics Co. Ltd., Ziphearing among others.
Tuesday, 7 March 2017
NFL investigating Giants for using two-way radio during game against Cowboys
Apparently using a two way radio during an American football game is frowned upon over in the good old US of A, This article is about a game between the Giants and the Cowboys. During a Game the coaching staff and Quarterback are not allowed to communicate if there is 15 seconds or less on the clock, this rule might have been broken with the use of a walkie talkie.
The NFL is investigating the Giants’ potentially rule-breaking use of a two-way radio during the team’s recent 10-7 win over the Dallas Cowboys.
The use of a two-way radio by a coach during a game is strictly against league rules, according to ESPN.
In the fourth quarter of the game, Giants head coach Ben McAdoo was spotted using a walkie-talkie to communicate play calls with Eli Manning after his headset malfunctioned.
The Cowboys issued a formal complaint to the league over the radio use, but the NFL’s investigation was already underway by the time Dallas contacted them.
The NFL has a rule against coaches using two-way handheld radios because the league cannot control when both parties are communicating.
A coach using a walkie-talkie makes it harder for the NFL to monitor a league rule that states communication from the sideline to the quarterback must end when 15 seconds are left on the play clock.
With headsets, the NFL has the power to shut off communication at will with a “cutoff switch operator,†ESPN reported.
The Giants had no comment when reached Thursday night.
McAdoo used the walkie talkie in question, however, for about four or five plays on the Giants’ fourth-quarter drive that ended in an Eli Manning interception on a pass intended for Victor Cruz.
McAdoo’s normal equipment malfunctioned and as the Giants worked to fix it, the coach was handed the walkie talkie temporarily because its signal was reaching Manning’s helmet.
As the Giants worked to correct McAdoo’s equipment, Odell Beckham Jr. could be seen running to the sideline to bring plays back to the huddle and Manning was heading over to the sideline, as well.
There is no evidence in reviewing the game film that demonstrates McAdoo was on the walkie talkie for longer than the allowed 15 seconds of communication with his quarterback.
There is also, of course, no evi dence that the Giants gained any advantage even if he was. The drive ended in a turnover and the Giants’ offense stunk most of the night.
The NFL is investigating the Giants’ potentially rule-breaking use of a two-way radio during the team’s recent 10-7 win over the Dallas Cowboys.
The use of a two-way radio by a coach during a game is strictly against league rules, according to ESPN.
In the fourth quarter of the game, Giants head coach Ben McAdoo was spotted using a walkie-talkie to communicate play calls with Eli Manning after his headset malfunctioned.
The Cowboys issued a formal complaint to the league over the radio use, but the NFL’s investigation was already underway by the time Dallas contacted them.
The NFL has a rule against coaches using two-way handheld radios because the league cannot control when both parties are communicating.
A coach using a walkie-talkie makes it harder for the NFL to monitor a league rule that states communication from the sideline to the quarterback must end when 15 seconds are left on the play clock.
With headsets, the NFL has the power to shut off communication at will with a “cutoff switch operator,†ESPN reported.
The Giants had no comment when reached Thursday night.
McAdoo used the walkie talkie in question, however, for about four or five plays on the Giants’ fourth-quarter drive that ended in an Eli Manning interception on a pass intended for Victor Cruz.
McAdoo’s normal equipment malfunctioned and as the Giants worked to fix it, the coach was handed the walkie talkie temporarily because its signal was reaching Manning’s helmet.
As the Giants worked to correct McAdoo’s equipment, Odell Beckham Jr. could be seen running to the sideline to bring plays back to the huddle and Manning was heading over to the sideline, as well.
There is no evidence in reviewing the game film that demonstrates McAdoo was on the walkie talkie for longer than the allowed 15 seconds of communication with his quarterback.
There is also, of course, no evi dence that the Giants gained any advantage even if he was. The drive ended in a turnover and the Giants’ offense stunk most of the night.
Saturday, 18 February 2017
How Headsets Transformed The Entire World
It is surprising how in a crowded, noisy environment you can still create your small world. This is one of the most amazing changes that have been made by headphones. Small devices with a big impact on the world are the only way to describe headphones. In the past, the only way to listen to music was through devices that allowed everyone to listen to music at the same time. With the introduction of headphones, you don’t have to bother everyone with your music; you can create your space and enjoy listening to what you like directly to your ears.
Early headphones were mainly used for communication purposes. The birth of headphones in early 19th century was purely for communication and professional uses. It is strange how the creator of headphones Nathaniel Baldwin didn’t have the musical concept in mind. The uses of headphones at this time were purely for professional uses by people in the army and also church coordination.
Discovery of stereo phones for music was a big break in the mid-19th century, the whole perspective of headphones changed from professional use and they were given a musical touch. The musical evolution changed the concept of headphones, and this gave birth to the stereo phone technology to cater for musical fanatics. This was when headphones specifically for music were created, but they were expensive.
Light weight portable headphones were discovered in the 1980s there was a big break after everything went mobile. The headphones now become lighter, and you could see youngsters carrying them around. The growth of the pop culture at this time might have had a huge impact on how people wanted to listen to their music and this made headphones grow more. The sound quality becomes better at this time.
Modern fashion statement headphones are now common to bring out personality and social standards. The headphones that we have now are bringing the fashion statement in mind. The unique design and the big brand names like Beat by Dre are bringing a new perspective on the way we view headphones. The technological advancement is sound quality is now improving due to latest technological innovations.
Good sound quality and faithfulness is one of the main benefits of headphones. We all agree listening to music through headphones feels good compared to listening through loudspeakers. The reason for this is quite listening simply. Music from headphones has no interference from external forces and especially if you are listening to music through quality headphones.
The concentration at work is now better with headphones. With the use of headphones, it is now possible to get peace of mind and keep up concentration whilst working. It is surprising how music takes us to a new world where we can be able to reflect and focus on the work we are doing. This is the reason why you will find people working in jobs that need a high level of concentration using headphones all the time.
Peace of mind and calming stress is a major reason why many people use headphones. Music is therapeutic, and it works wonders in relieving stress and restoring peace of mind. Listening to music through external speakers is good for entertainment but not necessarily for healing. There is something special about listening to music through headphones because it brings calmness and brings back peace of mind.
Privacy is one thing that many people seek in the crowded and noisy world. If you want to maintain privacy, then you can easily escape in your headphones and get the privacy that you need. People around you will understand that you need privacy and allow you to have your solitude.
The uses of headphones are now limitless, and they go beyond just for the sake of entertainment and communication purposes.
Music lovers get lost in their headphones for hours listening to music without interrupting the rest of the world with the type of music that they love. Using headphones, music lovers can get the sound effect that they want from the headphones through sound effect settings.
Transcribers who translate audio content into text need headphones to be able to listen to what they are typing. This is one of the most common professional use of headphones. Other people like pilots, recording artists and also the military use headphones in their job.
You can find a whole ton of two way radio headsets at this amazing store headsetonline.co.uk
How headphones have changed over time
Early headphones were mainly used for communication purposes. The birth of headphones in early 19th century was purely for communication and professional uses. It is strange how the creator of headphones Nathaniel Baldwin didn’t have the musical concept in mind. The uses of headphones at this time were purely for professional uses by people in the army and also church coordination.
Discovery of stereo phones for music was a big break in the mid-19th century, the whole perspective of headphones changed from professional use and they were given a musical touch. The musical evolution changed the concept of headphones, and this gave birth to the stereo phone technology to cater for musical fanatics. This was when headphones specifically for music were created, but they were expensive.
Light weight portable headphones were discovered in the 1980s there was a big break after everything went mobile. The headphones now become lighter, and you could see youngsters carrying them around. The growth of the pop culture at this time might have had a huge impact on how people wanted to listen to their music and this made headphones grow more. The sound quality becomes better at this time.
Modern fashion statement headphones are now common to bring out personality and social standards. The headphones that we have now are bringing the fashion statement in mind. The unique design and the big brand names like Beat by Dre are bringing a new perspective on the way we view headphones. The technological advancement is sound quality is now improving due to latest technological innovations.
Benefits of headphones in the modern world
Good sound quality and faithfulness is one of the main benefits of headphones. We all agree listening to music through headphones feels good compared to listening through loudspeakers. The reason for this is quite listening simply. Music from headphones has no interference from external forces and especially if you are listening to music through quality headphones.
The concentration at work is now better with headphones. With the use of headphones, it is now possible to get peace of mind and keep up concentration whilst working. It is surprising how music takes us to a new world where we can be able to reflect and focus on the work we are doing. This is the reason why you will find people working in jobs that need a high level of concentration using headphones all the time.
Peace of mind and calming stress is a major reason why many people use headphones. Music is therapeutic, and it works wonders in relieving stress and restoring peace of mind. Listening to music through external speakers is good for entertainment but not necessarily for healing. There is something special about listening to music through headphones because it brings calmness and brings back peace of mind.
Privacy is one thing that many people seek in the crowded and noisy world. If you want to maintain privacy, then you can easily escape in your headphones and get the privacy that you need. People around you will understand that you need privacy and allow you to have your solitude.
Who uses headphones?
The uses of headphones are now limitless, and they go beyond just for the sake of entertainment and communication purposes.
Music lovers get lost in their headphones for hours listening to music without interrupting the rest of the world with the type of music that they love. Using headphones, music lovers can get the sound effect that they want from the headphones through sound effect settings.
Transcribers who translate audio content into text need headphones to be able to listen to what they are typing. This is one of the most common professional use of headphones. Other people like pilots, recording artists and also the military use headphones in their job.
You can find a whole ton of two way radio headsets at this amazing store headsetonline.co.uk
Tuesday, 14 February 2017
Radio Earpieces: Eight Top Tips For Selecting The Right One
When choosing a radio earpiece, there are several factors that should be considered. A radio earpiece should not only aid in communication it should also protect the user’s ear against cumulative ear damage that may eventually result in ear loss. Below are the factors that you should consider when buying a radio earpiece;
1) Clarity of communication
The most important reason as to why you have a radio is for clear communication and this is what your radio earpiece should enhance. Although there are several radio earpieces out there, many of them use bone conduction when transmitting the user’s speech meaning that they heavily rely on vibrations of one’s skull as they talk. This does not help much in ensuring that the communications are clear especially when one is on the move.
You should therefore go for a system whose in-ear microphone does not use bone conduction and this will enhance the sound clarity. Such a system can even transmit speeches when one is whispering and this comes in handy especially when in an environment where secrecy is very crucial.
2) Comfort
It is very important to select a system that you feel comfortable with most importantly when you are to wear it on your head. Note that, you will probably be wearing the gear for long hours and that is why it should be of lightweight and should not in any way interfere with your eye wear or helmet.
Avoid heavy, sweaty and coiled tube earpieces that are very uncomfortable and will cause ear fatigue. Instead, go for a radio earpiece whose microphone is built into the earbud itself. Such earpieces come in various shapes and sizes and can even be customized to fit the specific needs of a user. Note that, military-grade materials are specifically designed to be of lightweight.
3) Durability
Durability is a very important factor that should be considered when choosing a radio earpiece . You obviously don’t want to be wasting your time and money going back to look for another earpiece just because the one you chose did not last. This is why it is very important to select a system that is durable and has been tested for rugged use of a soldier or a SWAT officer. Go for one whose manufacturer is experienced in manufacturing earpieces that can withstand water, dirt, shock and even extreme temperatures.
4) Ease of use
Your radio earpiece should be easy to use because you can’t afford to mess up with the push-to-talk or the on & off buttons especially when on the move. Your gear should immediately fit into your actions with minimum effort. Look at the operational and the ergonomic features of the various radio earpieces and make sure that all its features are both of the right sizes and in the right places.
5) Hearing protection
Claims related to hearing loss and its related disabilities is on the rise among police & military veterans and this has led to the need for hearing protection for officers. Note that, hearing loss occurs cumulatively over time and it is irreversible. This is in addition to the fact that it has been associated with cognitive decline and that is why even the minor hearing loss can have a huge impact in the course of time. Select a radio earpiece that not only ensures effective communication, but also the hearing safety of the user.
6) Situational awareness
An earpiece is basically meant to keep you focused and keep your hands free. You should be aware of what is happening in their surrounding and that is why a radio earpiece should allow one to hear sounds that are outside, to stay alert with their surroundings.
In order to have full communications (just like one would have without anything in their ears), it is wise to choose a radio earpiece that has an external microphone. There are systems that even enable you to adjust volume of the external microphone and this ensures that you are aware of the happenings in your surroundings.
7) Modularity & Compatibility
There are several systems that are available out there and you should look for one that fits your requirements. As mentioned above, some of them can be customized to fit an individual user’s specific needs so you can never run out of options.
A radio earpiece that has a modular connector is good as you can change it to match even a different radio without having to replace the entire system. Some systems can even go with both earbuds and over-the-ear earpieces so depending on your needs, select the appropriate system.
8) Affordability
Many years ago radio earpieces cost £100 and upwards, these days you can get a D-ring earpiece for less than £15 and an acoustic tube for about £25. Bone conductor earpieces that were previously and expensive piece of technology, can be yours for about £40.
1) Clarity of communication
The most important reason as to why you have a radio is for clear communication and this is what your radio earpiece should enhance. Although there are several radio earpieces out there, many of them use bone conduction when transmitting the user’s speech meaning that they heavily rely on vibrations of one’s skull as they talk. This does not help much in ensuring that the communications are clear especially when one is on the move.
You should therefore go for a system whose in-ear microphone does not use bone conduction and this will enhance the sound clarity. Such a system can even transmit speeches when one is whispering and this comes in handy especially when in an environment where secrecy is very crucial.
2) Comfort
It is very important to select a system that you feel comfortable with most importantly when you are to wear it on your head. Note that, you will probably be wearing the gear for long hours and that is why it should be of lightweight and should not in any way interfere with your eye wear or helmet.
Avoid heavy, sweaty and coiled tube earpieces that are very uncomfortable and will cause ear fatigue. Instead, go for a radio earpiece whose microphone is built into the earbud itself. Such earpieces come in various shapes and sizes and can even be customized to fit the specific needs of a user. Note that, military-grade materials are specifically designed to be of lightweight.
3) Durability
Durability is a very important factor that should be considered when choosing a radio earpiece . You obviously don’t want to be wasting your time and money going back to look for another earpiece just because the one you chose did not last. This is why it is very important to select a system that is durable and has been tested for rugged use of a soldier or a SWAT officer. Go for one whose manufacturer is experienced in manufacturing earpieces that can withstand water, dirt, shock and even extreme temperatures.
4) Ease of use
Your radio earpiece should be easy to use because you can’t afford to mess up with the push-to-talk or the on & off buttons especially when on the move. Your gear should immediately fit into your actions with minimum effort. Look at the operational and the ergonomic features of the various radio earpieces and make sure that all its features are both of the right sizes and in the right places.
5) Hearing protection
Claims related to hearing loss and its related disabilities is on the rise among police & military veterans and this has led to the need for hearing protection for officers. Note that, hearing loss occurs cumulatively over time and it is irreversible. This is in addition to the fact that it has been associated with cognitive decline and that is why even the minor hearing loss can have a huge impact in the course of time. Select a radio earpiece that not only ensures effective communication, but also the hearing safety of the user.
6) Situational awareness
An earpiece is basically meant to keep you focused and keep your hands free. You should be aware of what is happening in their surrounding and that is why a radio earpiece should allow one to hear sounds that are outside, to stay alert with their surroundings.
In order to have full communications (just like one would have without anything in their ears), it is wise to choose a radio earpiece that has an external microphone. There are systems that even enable you to adjust volume of the external microphone and this ensures that you are aware of the happenings in your surroundings.
7) Modularity & Compatibility
There are several systems that are available out there and you should look for one that fits your requirements. As mentioned above, some of them can be customized to fit an individual user’s specific needs so you can never run out of options.
A radio earpiece that has a modular connector is good as you can change it to match even a different radio without having to replace the entire system. Some systems can even go with both earbuds and over-the-ear earpieces so depending on your needs, select the appropriate system.
8) Affordability
Many years ago radio earpieces cost £100 and upwards, these days you can get a D-ring earpiece for less than £15 and an acoustic tube for about £25. Bone conductor earpieces that were previously and expensive piece of technology, can be yours for about £40.
Sunday, 12 February 2017
I Bought a Two-Way Radio With a Range of 25 Miles...Why Won’t It Work?
Sorry, but you’ve been had. Although many manufacturers boast that their radios can reach amazing distances, this is, in almost every instance we’ve encountered, a fallacy.
How is this legal, you may ask?
Essentially, your radio quite probably could work over a range of 25 miles, but that is a theoretical estimate, working on the assumption that the myriad variables that affect two-way radio signal (such as atmospheric conditions, topography, objects in the way and etc) are simply not in effect.
All of them. At the exact same time.
So, assuming that you used your two-way radio in a vacuum, where weather didn’t exist and no obstacles, man-made or otherwise, were present, you would be able to communicate with someone else who was further away in that impossible vacuum, maybe even 25 miles away, but otherwise? Forget it.
The fact is that the average two-way radio has a range of between one and two miles and not much more (maybe three, but we’re not making any promises). CB radio fares significantly better, largely because it makes use of large aerials. Now, Signal-boosting equipment can be used to improve your two-way’s performance (for example, repeaters), but such equipment is expensive and hard to obtain for legal reasons.
There are, however, a few factors that can have an affect on your radio’s range. The frequency being used, the power output, the size of the antenna, the complexity of the signal being sent, signal interference, background noise and (as we wrote earlier) objects in the way are all factors that can improve (or hamper) your efforts to get your signal to reach as far as possible.
So, talking on your radio whilst in the car will have a deleterious affect on your signal, as will deliberately walking through wooded areas or places with a lot of rocks/mountains if you can take an easier path.
However, a larger antenna (if you’re tech orientated, the antenna can be replaced with a better one â€" although this should only be attempted if you are
And
Also, your choice of VHF or UHF radio will have an affect as well, a UHF signal, for example, generally penetrates buildings and objects better than a VHF signal, whereas VHF is better for outdoor use where there is a lot of open space to transmit across.
Having said/written that, even in optimum conditions, you are extremely unlikely to transmit over a distance of 25 miles. Sorry.
As an aside, mobile phones don’t suffer from this lack of coverage, largely because cell towers are in place that bounce the signal from one to the other and thus carry it across a far larger area, your mobile is still your best bet to break that 25 mile mark, we’re afraid.
If you really must use radio communications over long distances, we recommend going to the Website 2wayradionline.co.uk
Hope that helps.
How is this legal, you may ask?
Essentially, your radio quite probably could work over a range of 25 miles, but that is a theoretical estimate, working on the assumption that the myriad variables that affect two-way radio signal (such as atmospheric conditions, topography, objects in the way and etc) are simply not in effect.
All of them. At the exact same time.
So, assuming that you used your two-way radio in a vacuum, where weather didn’t exist and no obstacles, man-made or otherwise, were present, you would be able to communicate with someone else who was further away in that impossible vacuum, maybe even 25 miles away, but otherwise? Forget it.
The fact is that the average two-way radio has a range of between one and two miles and not much more (maybe three, but we’re not making any promises). CB radio fares significantly better, largely because it makes use of large aerials. Now, Signal-boosting equipment can be used to improve your two-way’s performance (for example, repeaters), but such equipment is expensive and hard to obtain for legal reasons.
There are, however, a few factors that can have an affect on your radio’s range. The frequency being used, the power output, the size of the antenna, the complexity of the signal being sent, signal interference, background noise and (as we wrote earlier) objects in the way are all factors that can improve (or hamper) your efforts to get your signal to reach as far as possible.
So, talking on your radio whilst in the car will have a deleterious affect on your signal, as will deliberately walking through wooded areas or places with a lot of rocks/mountains if you can take an easier path.
However, a larger antenna (if you’re tech orientated, the antenna can be replaced with a better one â€" although this should only be attempted if you are
- a) Sure about licensing laws
And
- b) Tech savvy enough to void the warranty and not regret it later, can really add a few hundred meters to a radio’s range, as can a switch in frequencies.
Also, your choice of VHF or UHF radio will have an affect as well, a UHF signal, for example, generally penetrates buildings and objects better than a VHF signal, whereas VHF is better for outdoor use where there is a lot of open space to transmit across.
Having said/written that, even in optimum conditions, you are extremely unlikely to transmit over a distance of 25 miles. Sorry.
As an aside, mobile phones don’t suffer from this lack of coverage, largely because cell towers are in place that bounce the signal from one to the other and thus carry it across a far larger area, your mobile is still your best bet to break that 25 mile mark, we’re afraid.
If you really must use radio communications over long distances, we recommend going to the Website 2wayradionline.co.uk
Hope that helps.
Subscribe to:
Posts (Atom)