They are not just your normal earpieces. Nor are they just anything that lets you listen to your music. For any security guard, detective officer or investigator, ordering for the icom radio earpiece will not just be any other addition. In a world that is revolving around quality innovations, having the best set of earpieces in town should be your least target as a security officer. It can be even better if you do rely on the radio technology to send and receive signals in an institution. Just know that, if you really need some light and top notch earpieces, then this is the perfect offer you will ever get.
Product description
Different with most radio earpieces, this model is exceptionally light and durable to last for as long as you possible. They are easy to use as they donât drop easily. However, what wows most customers is its audio quality. On trying them out, you will indeed approve of the quality audio that can be excellent for numerous contexts. The PTT or microphone holding clips allow you to simply attach them to your vest. When displaced while walking, you can simply press from the front instead of grabbing the whole unit to get it back in position. Though mostly used by investigators and detective officers carrying out operations, getting them for your security guards will enhance that surety on the quality of signal reception.
How to where them
These exceptional pieces are long wired. You can thus wear them under any clothing that can allow the microphone to be passed down through your sleeves to the cuff where you will clip them. You may also find it comfortable to clip them to the vest or just near the lapel for perfect communication. The length of the wire is about 110cm. add that to the allowance created by these devices and you will have a comfortable receiver to walk around with. For anyone who really understands what the nature of the job demands, then missing out on such top quality earpieces is not likely.
Features
- Electric microphone- it has an in-built electric microphone with a hidden speaker located just at center of the switch.
- Low profile high quality sound- with the flexible and transparent acoustic tube, you are not only assured of top quality sound, but also efficient undercover work as the transparent tube wonât be noticed.
- A 2 jack straight plug â"it the 3.5mm mono the 2.5 mono spaced at 6.7mm between each.
Benefits
The technology used to make the microphone gives you the wide line between this product and some other counterfeit earpieces in the market. It is comfortable and doesnât strain you around on your job. You donât need to worry about your undercover job being blown up due to microphone exposure. This is what has made many customers to appreciate icom radio earpiece devices. It can be accommodated in any kind of clothing due to its small size.
Furthermore, its available connectors come in a sleek design that helps perform tasks as you use two way radios. However, you are advised to check for connectors that suit the task at hand. For instance, if one opts for a straight connector pin that works well for marine radios for domestic use, then expect a great difference in the sound quality. Each one of them is designed to work well in certain environments. Thatâs why buying, there will be certain assets to be considered for a perfect one for your task. All in all, the earpieces offer the best quality sounds for work stations such as real estate, transport, shipping, healthcare and security.
Cons
There are no current negative issues about these devices. You just have to ensure that you order directly from respectable sites that sell them. This will help avoid getting fake devices. It also offers you a chance to understand the perfect connectors suitable for certain fields. You will surely have no issues with these earpieces.
Conclusion
For better security performance, you will need the best headsets for communication. Without even getting referrals from anyone, the quality of icom radio earpiece will definitely prove to be the best. You can then enjoy connecting with fellow colleagues, clients and loved ones through this modern innovation. Donât miss out on the best earpiece around being offered at just £20! Good luck!
Tuesday, 31 March 2015
Wednesday, 25 March 2015
RFID and AIDC News: What is Zebra's Strategy for Motorola's Mobile Wireless and Data Collection Businesses?
In early 2014, printing and RFID system focused Zebra Technologies announced it was acquiring the "Enterprise Systems" business from Motorola Solutions, in a deal that closed in late October. That left Motorola to focus on its radio systems business.
It was a somewhat surprising move, certainly moving Zebra up the supply chain food change. What was the strategy behind the deal? How fast and how far will the integration of Motorola into Zebra go? Is Zebra now a "solutions" company?
SCDigest editor Dan Gilmore recently interviewed Mike Terzich, Zebra's Chief Administrative Officer who is leading the integration program, on these and several other topics.
Gilmore: Mike, before we start talking about the Motorola Enterprise acquisition, you've been around the Auto ID industry for two decades. Not long ago, it was a very recognized and defined space. Now, not so much. It doesn't receive much press coverage at all today, though SCDigest is trying to rectify that a bit. Is it because it's just so easy to make it work today that end users just don't need much education any more?
Terzich: I think part of the reason that it has evolved the way it has is that if you look at who the industry icons were back in the day, the Intermecs, the Symbols [Symbol Technologies], the Telxons, the Hand Held Products, Datamax - all of them have been consolidated up into large industrial conglomerates. Zebra is really one of the last of the independents.
For years, you had so much independent development, and every manufacturer had their own operating language and everything was proprietary, so that added a dimension of complexity that users had to deal with. Over time, as architectures became more open and interoperable, the mystery kind of disappeared on how to implement and integrate this stuff. The question now is not really about the technical aspects, but issues like how to optimize my assets across my supply chain network. Today it is much more of an application and business question than it is a technical one with Auto ID.
Gilmore: I must admit the Motorola announcement took me a bit by surprise, though it was clear there were some tensions within the old Motorola Solutions between the radio side and the wireless and data collection businesses. What was Zebra's strategy in making this deal?
Terzich: A little bit history - we tried to be part of the opportunity back in 2006 and 2007 when Symbol Technologies was put on the market and eventually found its way to Motorola. We made a pitch at the time - I was personally involved - and as I like to say we were a day late and a dollar short in terms of making a deal.
So our interest level from a strategic perspective has really been in place for seven years. So when the opportunity re-presented itself last year, our CEO Anders Gustafsson and Motorola started to have some conversations. For us, it was always about the attraction of where we saw the market evolving, and this whole concept around enterprise apps and intelligence, the interest of companies to optimize across their value chains, and we felt that the combination of Zebra and the enterprise mobility business from Motorola made complete sense because it allowed us to offer a broader portfolio and a higher percentage of the solution offering.
For us, it also allows us to become closer to the application development side of the business. As a printing company, while we had a vision and an aspiration to be part of where enterprises were willing to go in terms of managing their business, it's hard to lead application and solution development around your brand when you're the printing component. Printing has become almost second nature today, while the wireless business and the portfolio Motorola has there in terms of mobile computing and the trends were we seeing with Cloud-based application development, the Internet of Things, asset optimization, and ubiquitous mobility - that's what enticed us to say this is still a very relevant strategic opportunity today as it was back in 2007.
Gilmore: I understand you have rather fully integrated Motorola in already. I would have thought that initially, given the very different nature of the business, that you would have started with it as separate SBU. I also understand you are quickly getting rid of the Motorola brand name in favor of it all being Zebra Technologies. Is that correct, and if Yes, what was the thinking?
Terzich: It's semi-correct. Where we are integrated is in our go-to-market strategy and our face to the customer. When you look at where Motorola Enterprise Mobility was selling, who their customers were and their routes to market, it was a combination of strategically calling on some very large end users and a significant reseller and integrator channel. It turned out that the amount of common end user customers and channel partners between Zebra and Motorola Enterprise is really quite significant.
So we had the opportunity to integrate sales forces, and when you think about it through the eyes of the sales team, your carrying more products in your sales bag, you are selling largely to the same channel partners that Zebra and Motorola were both selling to independently. The largest end users are mostly customers in common, so there was some natural synergistic opportunity in our go to market model.
Where we have remained separate is in the R&D and development side, because the product lines are complementary not competitive, and over time Motorola's competency in mobile computing, data collection and wireless networks are unique skill sets for us. So we are maintaining separate engineering and product development organizations, but we come together with a common global sales and marketing organization.
Gilmore: And what about the branding? Is the Motorola name gone, it is now all Zebra Technologies going forward?
Terzich: From a contractual/legal perspective, we have to get off the name and the "batwings" [the Motorola logo] as part of the transaction, so it's not like we have a choice. We can however leverage the Symbol Technologies brand, and we are going to do that as a product brand is some isolated areas. But Symbol as a name has been out of circulation for about seven years, and while it has some affinity say in the reseller community, the long term strategy is that everything will be branded Zebra Technologies.
But in the transitional period there will be some product that have to transfer to a Symbol products sub-brand as a means to get off of the Motorola bat wings.
Gilmore: What's your take on wireless systems market? It really now is just down in the US to just two major players, Honeywell and now Zebra. Is it is still a good market, a growth market?
Terzich: What's interesting about the combination is we're now number one in mobile computing, number one in data collection, and number one in printing. We have a very large global service organization. And then you get to wireless LAN, and that's the fifth of our major revenue buckets.
What's interesting about wireless LAN is that it has the highest growth profile of any of those segments, but clearly Motorola's position here is not number 1. You have some very large players [e.g., Cisco] that operate in a more horizontal market mode, and focus generally on more "carpeted" areas of a business, versus a distribution center or shop floor or a retail store. I think Motorola had done a nice job of carving out a niche relative to some markets that we service, principally in the retail and some of the hospitality markets, and the product has been successful and we have quite a bit of customer loyalty in these sectors.
So our strategy going forward from a wireless LAN perspective is to be very vertically focused and application specific where the product has some advantages, and to build off that customer loyalty. We don't think the answer is to compete broadly in the wireless LAN marketplace because we don't have the R&D engine or the brand equity in some of those markets or applications.
So we are going to stick to our knitting, which will concentrated in retail, hospitality and healthcare, where our product seems to resonate.
Gilmore: You and Motorola use primarily a channels strategy. Are you in the solutions business, and can you do that if you use a channels strategy and are one-step removed from the customer?
Terzich: Great question.
One of the things that most people don't realize is that Zebra, organically before the Motorola acquisition, had about 80% of its business through channels and about 20% through some large, named strategic accounts. And those accounts tended to be some very sophisticated adopters of technology that effectively act as their own systems integrator.
These are large retailers, large transportation companies, and large manufacturers that well understand how to deploy technology to drive efficiency and productivity. So that was our composite, and Motorola's was very similar, the difference being that because Motorola offered enterprise mobile computing, they tended to call a little higher in those organizations, and they worked more closely with application developers and independent software developers because usually the real problem is solved by application software and re-engineering of business processes.
So Motorola may have been calling on maybe 40% of its revenue from a strategic account perspective, and that means they had a seat at the end user table and they are influencing those companies, even if those are sometimes still being fulfilled through channels.
So where do we fall in the solutions spectrum? Both product lines do not constitute a solution by themselves, they still need to connect to application software and that requires integration support. So the channel will remain a very vital part of the strategy.
At a very simple level, we see that there are opportunities for better enabling application software. So how do we make mobile printing devices and mobile computing and data collection devices better together from a product design set? How do we make our technology more interoperable and attractive for application development?
When you look at this technology and how ubiquitous it is you, find that deployment is really though many hundreds of application developers. You don't see a small number of applications as being really dominant. Our job is to continue to work with those developers to make our solutions as easy to integrate with them as we can.
No CIO or CFO goes to bed at night thinking "I need to bar code something." But they do wake up and say I need to take a billion dollars out my supply chain, or whatever the figure is. What we do is often a key piece of what becomes the strategy to achieve those goals.
Gilmore: If I understand it right, you have released your own Voice solution, originally developed by Motorola's Psion unit in Europe, here into the US market. Before, Motorola relied exclusively on partners here for Voice software. What is the strategy?
Terzich: Ultimately, Voice as a technology is just another extension of using mobility to make operations more productive and efficient, especially in warehousing applications. So it's really just a continuum to us of bringing more capability to those that are trying to optimize workflow. Workflow has become without question one of the biggest areas of opportunity across anyone's supply chain. This is part of why we are so excited about the combined portfolio in general, and our Voice solution is part of that.
Gilmore: Mike, appreciate you sharing your insight today.
Terzich: Thanks Dan. I enjoyed the conversation.
For more information and conversation visit the source of this article - http://www.scdigest.com/ontarget/15-02-04-1.php?cid=8965
It was a somewhat surprising move, certainly moving Zebra up the supply chain food change. What was the strategy behind the deal? How fast and how far will the integration of Motorola into Zebra go? Is Zebra now a "solutions" company?
SCDigest editor Dan Gilmore recently interviewed Mike Terzich, Zebra's Chief Administrative Officer who is leading the integration program, on these and several other topics.
Gilmore: Mike, before we start talking about the Motorola Enterprise acquisition, you've been around the Auto ID industry for two decades. Not long ago, it was a very recognized and defined space. Now, not so much. It doesn't receive much press coverage at all today, though SCDigest is trying to rectify that a bit. Is it because it's just so easy to make it work today that end users just don't need much education any more?
Terzich: I think part of the reason that it has evolved the way it has is that if you look at who the industry icons were back in the day, the Intermecs, the Symbols [Symbol Technologies], the Telxons, the Hand Held Products, Datamax - all of them have been consolidated up into large industrial conglomerates. Zebra is really one of the last of the independents.
For years, you had so much independent development, and every manufacturer had their own operating language and everything was proprietary, so that added a dimension of complexity that users had to deal with. Over time, as architectures became more open and interoperable, the mystery kind of disappeared on how to implement and integrate this stuff. The question now is not really about the technical aspects, but issues like how to optimize my assets across my supply chain network. Today it is much more of an application and business question than it is a technical one with Auto ID.
Gilmore: I must admit the Motorola announcement took me a bit by surprise, though it was clear there were some tensions within the old Motorola Solutions between the radio side and the wireless and data collection businesses. What was Zebra's strategy in making this deal?
Terzich: A little bit history - we tried to be part of the opportunity back in 2006 and 2007 when Symbol Technologies was put on the market and eventually found its way to Motorola. We made a pitch at the time - I was personally involved - and as I like to say we were a day late and a dollar short in terms of making a deal.
So our interest level from a strategic perspective has really been in place for seven years. So when the opportunity re-presented itself last year, our CEO Anders Gustafsson and Motorola started to have some conversations. For us, it was always about the attraction of where we saw the market evolving, and this whole concept around enterprise apps and intelligence, the interest of companies to optimize across their value chains, and we felt that the combination of Zebra and the enterprise mobility business from Motorola made complete sense because it allowed us to offer a broader portfolio and a higher percentage of the solution offering.
For us, it also allows us to become closer to the application development side of the business. As a printing company, while we had a vision and an aspiration to be part of where enterprises were willing to go in terms of managing their business, it's hard to lead application and solution development around your brand when you're the printing component. Printing has become almost second nature today, while the wireless business and the portfolio Motorola has there in terms of mobile computing and the trends were we seeing with Cloud-based application development, the Internet of Things, asset optimization, and ubiquitous mobility - that's what enticed us to say this is still a very relevant strategic opportunity today as it was back in 2007.
Gilmore: I understand you have rather fully integrated Motorola in already. I would have thought that initially, given the very different nature of the business, that you would have started with it as separate SBU. I also understand you are quickly getting rid of the Motorola brand name in favor of it all being Zebra Technologies. Is that correct, and if Yes, what was the thinking?
Terzich: It's semi-correct. Where we are integrated is in our go-to-market strategy and our face to the customer. When you look at where Motorola Enterprise Mobility was selling, who their customers were and their routes to market, it was a combination of strategically calling on some very large end users and a significant reseller and integrator channel. It turned out that the amount of common end user customers and channel partners between Zebra and Motorola Enterprise is really quite significant.
So we had the opportunity to integrate sales forces, and when you think about it through the eyes of the sales team, your carrying more products in your sales bag, you are selling largely to the same channel partners that Zebra and Motorola were both selling to independently. The largest end users are mostly customers in common, so there was some natural synergistic opportunity in our go to market model.
Where we have remained separate is in the R&D and development side, because the product lines are complementary not competitive, and over time Motorola's competency in mobile computing, data collection and wireless networks are unique skill sets for us. So we are maintaining separate engineering and product development organizations, but we come together with a common global sales and marketing organization.
Gilmore: And what about the branding? Is the Motorola name gone, it is now all Zebra Technologies going forward?
Terzich: From a contractual/legal perspective, we have to get off the name and the "batwings" [the Motorola logo] as part of the transaction, so it's not like we have a choice. We can however leverage the Symbol Technologies brand, and we are going to do that as a product brand is some isolated areas. But Symbol as a name has been out of circulation for about seven years, and while it has some affinity say in the reseller community, the long term strategy is that everything will be branded Zebra Technologies.
But in the transitional period there will be some product that have to transfer to a Symbol products sub-brand as a means to get off of the Motorola bat wings.
Gilmore: What's your take on wireless systems market? It really now is just down in the US to just two major players, Honeywell and now Zebra. Is it is still a good market, a growth market?
Terzich: What's interesting about the combination is we're now number one in mobile computing, number one in data collection, and number one in printing. We have a very large global service organization. And then you get to wireless LAN, and that's the fifth of our major revenue buckets.
What's interesting about wireless LAN is that it has the highest growth profile of any of those segments, but clearly Motorola's position here is not number 1. You have some very large players [e.g., Cisco] that operate in a more horizontal market mode, and focus generally on more "carpeted" areas of a business, versus a distribution center or shop floor or a retail store. I think Motorola had done a nice job of carving out a niche relative to some markets that we service, principally in the retail and some of the hospitality markets, and the product has been successful and we have quite a bit of customer loyalty in these sectors.
So our strategy going forward from a wireless LAN perspective is to be very vertically focused and application specific where the product has some advantages, and to build off that customer loyalty. We don't think the answer is to compete broadly in the wireless LAN marketplace because we don't have the R&D engine or the brand equity in some of those markets or applications.
So we are going to stick to our knitting, which will concentrated in retail, hospitality and healthcare, where our product seems to resonate.
Gilmore: You and Motorola use primarily a channels strategy. Are you in the solutions business, and can you do that if you use a channels strategy and are one-step removed from the customer?
Terzich: Great question.
One of the things that most people don't realize is that Zebra, organically before the Motorola acquisition, had about 80% of its business through channels and about 20% through some large, named strategic accounts. And those accounts tended to be some very sophisticated adopters of technology that effectively act as their own systems integrator.
These are large retailers, large transportation companies, and large manufacturers that well understand how to deploy technology to drive efficiency and productivity. So that was our composite, and Motorola's was very similar, the difference being that because Motorola offered enterprise mobile computing, they tended to call a little higher in those organizations, and they worked more closely with application developers and independent software developers because usually the real problem is solved by application software and re-engineering of business processes.
So Motorola may have been calling on maybe 40% of its revenue from a strategic account perspective, and that means they had a seat at the end user table and they are influencing those companies, even if those are sometimes still being fulfilled through channels.
So where do we fall in the solutions spectrum? Both product lines do not constitute a solution by themselves, they still need to connect to application software and that requires integration support. So the channel will remain a very vital part of the strategy.
At a very simple level, we see that there are opportunities for better enabling application software. So how do we make mobile printing devices and mobile computing and data collection devices better together from a product design set? How do we make our technology more interoperable and attractive for application development?
When you look at this technology and how ubiquitous it is you, find that deployment is really though many hundreds of application developers. You don't see a small number of applications as being really dominant. Our job is to continue to work with those developers to make our solutions as easy to integrate with them as we can.
No CIO or CFO goes to bed at night thinking "I need to bar code something." But they do wake up and say I need to take a billion dollars out my supply chain, or whatever the figure is. What we do is often a key piece of what becomes the strategy to achieve those goals.
Gilmore: If I understand it right, you have released your own Voice solution, originally developed by Motorola's Psion unit in Europe, here into the US market. Before, Motorola relied exclusively on partners here for Voice software. What is the strategy?
Terzich: Ultimately, Voice as a technology is just another extension of using mobility to make operations more productive and efficient, especially in warehousing applications. So it's really just a continuum to us of bringing more capability to those that are trying to optimize workflow. Workflow has become without question one of the biggest areas of opportunity across anyone's supply chain. This is part of why we are so excited about the combined portfolio in general, and our Voice solution is part of that.
Gilmore: Mike, appreciate you sharing your insight today.
Terzich: Thanks Dan. I enjoyed the conversation.
For more information and conversation visit the source of this article - http://www.scdigest.com/ontarget/15-02-04-1.php?cid=8965
Monday, 16 March 2015
What are the benefits of the Motorola DP2400?
If you work on a construction site or in a factory, you know how imperative it is to keep your employee safe at all times. MOTOTRBO digital radio solutions can help you achieve exactly that, providing you with the chance to communicate with other members of staff quickly, safely, and effectively.
The Motorola DP2400 is one of the world's most advanced digital radio solutions, and can be used in a number of different environments, from production lines to construction sites. Just give your team the communication device in order to improve safety in the workplace. The product comes with intelligent voice announcement and audio features which facilitate easy communication in work environments that require instant contact with other staff. The product is available in both VHF and UHF frequency bands, giving you greater flexibility than ever before. You'll also be able to upgrade to digital at your own pace, and take advantage of a wealth of different features.
Product specification
The DP2400 features 16 channel capacity, IP55 specifications for water protection, and three programmable buttons. The VHF frequency operates on 136-174 MHz, while the UHF frequency operates on 403-527 MHz. With a three-color LED screen for visual feedback when operating the digital device, the product has large push-to-talk buttons which ensure instant communication wherever your staff are. The product is easy to use, and comes with a full instructional guide - with all the information you need to get started. You will also be able to contact Motorola if you have a technical query, or just need some more advice on how to use the Motorola DP2400Â to its full capability.
Other features
Other Motorlola DP2400 features include two programmable buttons which can increase operator efficiency, analogue mode, and a remote monitor which can allow you to quickly assess remote user status and make sure your employees are safe. Group, All-call and individual capability is also available. The product has an attractive design, with VOX capability, five tone signalling (via software purchase), and privacy features (with even more privacy options via software purchase). You'll be able to quickly attach and remove accessories without using a tool with a new accessory connector, and take advantage of intelligent audio which adjusts background noise and makes communication clearer (ideal in noisy workplaces like construction sites and factories). The product also provides conventional multiple site coverage, as well as capacity plus and linked capacity plus via software purchase.
The Motorola DP2400 is one of the world's most advanced digital radio solutions, and can be used in a number of different environments, from production lines to construction sites. Just give your team the communication device in order to improve safety in the workplace. The product comes with intelligent voice announcement and audio features which facilitate easy communication in work environments that require instant contact with other staff. The product is available in both VHF and UHF frequency bands, giving you greater flexibility than ever before. You'll also be able to upgrade to digital at your own pace, and take advantage of a wealth of different features.
Product specification
The DP2400 features 16 channel capacity, IP55 specifications for water protection, and three programmable buttons. The VHF frequency operates on 136-174 MHz, while the UHF frequency operates on 403-527 MHz. With a three-color LED screen for visual feedback when operating the digital device, the product has large push-to-talk buttons which ensure instant communication wherever your staff are. The product is easy to use, and comes with a full instructional guide - with all the information you need to get started. You will also be able to contact Motorola if you have a technical query, or just need some more advice on how to use the Motorola DP2400Â to its full capability.
Other features
Other Motorlola DP2400 features include two programmable buttons which can increase operator efficiency, analogue mode, and a remote monitor which can allow you to quickly assess remote user status and make sure your employees are safe. Group, All-call and individual capability is also available. The product has an attractive design, with VOX capability, five tone signalling (via software purchase), and privacy features (with even more privacy options via software purchase). You'll be able to quickly attach and remove accessories without using a tool with a new accessory connector, and take advantage of intelligent audio which adjusts background noise and makes communication clearer (ideal in noisy workplaces like construction sites and factories). The product also provides conventional multiple site coverage, as well as capacity plus and linked capacity plus via software purchase.
Sunday, 15 March 2015
Legalize it? Colo. considers one-ear, in-car headsets
Colorado could become more friendly for hands-free talking under a proposed tweak to state traffic law.
The bill would specifically legalize the use of one-ear headsets by drivers, if connected to a mobile phone.
Current Colorado law bans the use of "earphones" behind the wheel, which is defined as "any headset, radio, tape player, or other similar device which provides the listener with radio programs, music, or other recorded information through a device attached to the head and which covers all of or a portion of the ears."
While that definition does not specifically cover phone calls, it leaves enough ambiguity in law that a small group of House Democrats wants to clear it up.
HB 1207 would add an exception to the definition of "earphones" in state law, to exempt: "a headset that only covers all or a 10 portion of one ear and that is connected to a wireless, hand-held telephone."
The house transportation committee unanimously passed the bill on Thursday morning.
Colorado law does not specifically address the issue of hands-free phone use versus calls made with a handset held to the driver's head. Under Colorado law, adults are allowed to engage in phone calls behind the wheel, while minors are not.
Numerous scientific studies conclude that hands-free talking is not significantly safer for drivers than talking with the phone held to the ear.
More important than tying up a hand is the fact that engaging in a phone conversation ties up the brain, splitting a driver's attention between the call and the road and using a significant chunk of the brains cognitive capacity when it would be better applied to the task of driving.
In 2013, Colorado police officers reported that 1,311 crashes were caused at least in part by distraction due to a cell phone, roughly the same number caused by distractions from passengers actually in the cars that crashed.
That statistic does not differentiate between the use of a phone for talking versus texting. Texting behind the wheel is illegal for drivers of all ages in Colorado.
Source -Â http://www.9news.com/story/tech/personal-tech/2015/02/11/one-ear-headsets-drivers/23234425/
The bill would specifically legalize the use of one-ear headsets by drivers, if connected to a mobile phone.
Current Colorado law bans the use of "earphones" behind the wheel, which is defined as "any headset, radio, tape player, or other similar device which provides the listener with radio programs, music, or other recorded information through a device attached to the head and which covers all of or a portion of the ears."
While that definition does not specifically cover phone calls, it leaves enough ambiguity in law that a small group of House Democrats wants to clear it up.
HB 1207 would add an exception to the definition of "earphones" in state law, to exempt: "a headset that only covers all or a 10 portion of one ear and that is connected to a wireless, hand-held telephone."
The house transportation committee unanimously passed the bill on Thursday morning.
Colorado law does not specifically address the issue of hands-free phone use versus calls made with a handset held to the driver's head. Under Colorado law, adults are allowed to engage in phone calls behind the wheel, while minors are not.
Numerous scientific studies conclude that hands-free talking is not significantly safer for drivers than talking with the phone held to the ear.
More important than tying up a hand is the fact that engaging in a phone conversation ties up the brain, splitting a driver's attention between the call and the road and using a significant chunk of the brains cognitive capacity when it would be better applied to the task of driving.
In 2013, Colorado police officers reported that 1,311 crashes were caused at least in part by distraction due to a cell phone, roughly the same number caused by distractions from passengers actually in the cars that crashed.
That statistic does not differentiate between the use of a phone for talking versus texting. Texting behind the wheel is illegal for drivers of all ages in Colorado.
Source -Â http://www.9news.com/story/tech/personal-tech/2015/02/11/one-ear-headsets-drivers/23234425/
Saturday, 14 March 2015
Nedaa and Hytera Provide World-Class TETRA Radios for Dubai Tour 2015
Nedaa, the sole and largest TETRA operator in Dubai proudly teamed up with Hytera Communications, a world's leading Professional Mobile Radio communications solution provider, which offered reliable and smooth communications support to the grand cycling event Dubai Tour 2015, which kicked off on Feb. 4th and is to complete on Feb. 7th.
The inaugural Dubai Tour was held in 2014, and the race expanded and hosted 16 World Tour teams in 2015. From the very beginning, Nedaa was officially chosen as the communications solution provider by the organizing committee for its excellence in technical planning and service.
For the 2nd Dubai Tour, Nedaa integrated Z1p, Hytera's latest handheld TETRA two-way radio, into its network, which offers full coverage of the 4 tracks measuring nearly 700km in total. Hytera Z1p was developed in complete correspondence with the open ETSI standard TETRA. Its military-standard ruggedness and public-safety level functionalities come with an ultra-slim full-keypad body as thin as 23mm. The site survey executed by Nedaa shows that its system and Hytera Z1p synergize very well in skyscraper-crowded downtown, open terrain and hills.
During the Tour, the radios were intensely used by the staff from the organizer and Dubai Sports Council to ensure smooth collaboration among different work groups. Nedaa's network also offered cross-department communication to the police and other institutions. "Nedaa is very proud to be the official communications provider for such a powerful event. Hytera Z1p TETRA radios are well designed for mission critical communication during events like Dubai Tour in terms of both functionality and usability. It has great potential of serving our customers. We look to provide services according to the highest international standards and the best practices in the field of public safety and telecommunications security in order for Dubai to rank amongst the most prominent countries in the world in this field," commented Mr. Mansoor Bu Osaiba, Deputy Chief Executive Director of Nedaa.
About Nedaa
Nedaa is a Dubai Government-Owned and Controlled Corporation (GOCC). Established in June of 2008, the company made significant waves as it became the first in the Middle East to implement the Terrestrial Trunked Radio Network (TETRA). To date, Nedaa's services are tied up with Dubai Governmentâs Strategic Plan, which aims at setting plenary plans and potential scenarios for crises and catastrophes. The company's list of clients include RTA, Dubai Police, Dubai Municipality, MAF Group, Dubai Investment Park, The Address Hotel, G4S, Dubai Health Authority and Dubai Aluminum, to name a few.
http://www.nedaa.ae
About Hytera
Hytera, a world's leading Professional Mobile Radio (PMR) communications solution provider, promotes major open standard technologies, including TETRA, DMR and PDT, and endeavors to ensure smooth technology migration to LTE broadband for its customers. Founded in 1993 in Shenzhen, China, Hytera became a public company in 2011 at Shenzhen Stock Exchange.
http://www.hytera.com
The inaugural Dubai Tour was held in 2014, and the race expanded and hosted 16 World Tour teams in 2015. From the very beginning, Nedaa was officially chosen as the communications solution provider by the organizing committee for its excellence in technical planning and service.
For the 2nd Dubai Tour, Nedaa integrated Z1p, Hytera's latest handheld TETRA two-way radio, into its network, which offers full coverage of the 4 tracks measuring nearly 700km in total. Hytera Z1p was developed in complete correspondence with the open ETSI standard TETRA. Its military-standard ruggedness and public-safety level functionalities come with an ultra-slim full-keypad body as thin as 23mm. The site survey executed by Nedaa shows that its system and Hytera Z1p synergize very well in skyscraper-crowded downtown, open terrain and hills.
During the Tour, the radios were intensely used by the staff from the organizer and Dubai Sports Council to ensure smooth collaboration among different work groups. Nedaa's network also offered cross-department communication to the police and other institutions. "Nedaa is very proud to be the official communications provider for such a powerful event. Hytera Z1p TETRA radios are well designed for mission critical communication during events like Dubai Tour in terms of both functionality and usability. It has great potential of serving our customers. We look to provide services according to the highest international standards and the best practices in the field of public safety and telecommunications security in order for Dubai to rank amongst the most prominent countries in the world in this field," commented Mr. Mansoor Bu Osaiba, Deputy Chief Executive Director of Nedaa.
About Nedaa
Nedaa is a Dubai Government-Owned and Controlled Corporation (GOCC). Established in June of 2008, the company made significant waves as it became the first in the Middle East to implement the Terrestrial Trunked Radio Network (TETRA). To date, Nedaa's services are tied up with Dubai Governmentâs Strategic Plan, which aims at setting plenary plans and potential scenarios for crises and catastrophes. The company's list of clients include RTA, Dubai Police, Dubai Municipality, MAF Group, Dubai Investment Park, The Address Hotel, G4S, Dubai Health Authority and Dubai Aluminum, to name a few.
http://www.nedaa.ae
About Hytera
Hytera, a world's leading Professional Mobile Radio (PMR) communications solution provider, promotes major open standard technologies, including TETRA, DMR and PDT, and endeavors to ensure smooth technology migration to LTE broadband for its customers. Founded in 1993 in Shenzhen, China, Hytera became a public company in 2011 at Shenzhen Stock Exchange.
http://www.hytera.com
Cambridge United v Manchester United: Sepura kit out Uâs stewards with new radios in time for big match
SEPURA has kitted out Cambridge United stewards with radios ahead of tomorrow's big FA Cup with Manchester United.
The portable DMR radios replace the club's analogue communication system and will be officially used for the first time at the R Costings Abbey Stadium when Richard Money's side face the Red Devils in the sell-out fourth round fixture.
U's chief executive Jez George said: "The forthcoming FA Cup match is one of the biggest event in the history of our club, we are aware of the global exposure that it will give to Cambridge United and need to ensure that everything runs smoothly and successfully on the day.
"Thanks to our new Sepura digital radios we'll be ready to overcome any challenges that may arise during the event."
Read more: http://www.cambridge-news.co.uk/Cambridge-United-v-Manchester-United-Sepura-kit-U/story-25907956-detail/story.html#ixzz3Q7DHgeWn
The portable DMR radios replace the club's analogue communication system and will be officially used for the first time at the R Costings Abbey Stadium when Richard Money's side face the Red Devils in the sell-out fourth round fixture.
U's chief executive Jez George said: "The forthcoming FA Cup match is one of the biggest event in the history of our club, we are aware of the global exposure that it will give to Cambridge United and need to ensure that everything runs smoothly and successfully on the day.
"Thanks to our new Sepura digital radios we'll be ready to overcome any challenges that may arise during the event."
Read more: http://www.cambridge-news.co.uk/Cambridge-United-v-Manchester-United-Sepura-kit-U/story-25907956-detail/story.html#ixzz3Q7DHgeWn
Friday, 13 March 2015
How Does Spy Earpiece Work?
The spy earpiece is a gadget of the future that facilitates our lives. With the spy earpiece invisible communication is performed in most troublesome situations when cover assistance is necessary.
The main feature of the spy earpiece is its complete invisibility. First of all, the spy earpiece goes in beige hue that is very close to skin color. So when you insert it into the ear, nobody can even notice it. Besides, the spy earpiece can boast of super tiny dimensions that ensure absolute invisibility of the gadget when it is in the ear.
The good news is the spy earpiece is available on the market in diverse gadget sets. The most popular of them are Bluetooth Set, Watch Set, MP3 Set and Glasses Set. Each one of the sets listed above has an in-built transmitter and a microphone (in the loop for Bluetooth and MP3, in the bow of the glasses and on the reverse side of the watch). Thanks to the transmitter, the gadget gets connected to the cell phone. And thanks to the sensitive microphone your partner will hear your every word even if you whisper. So, as you can see the spy earpiece set consists of the transmitter with an embedded microphone and a spy earpiece with a battery.
It is pretty easy to use the spy earpiece. What you have to do is the following sequence of steps:
· Put the transmitter. If you use the Bluetooth or MP3 spy earpiece set, you are supposed to put on the loop round your neck. Make sure that the loop is properly hidden under your clothes. For Spy earpiece Watch set you put on the watch on your wrist, and for Spy earpiece Glasses set â" just use it like ordinary glasses.
· Insert the battery into the spy earpiece. Every set comes with a detailed guidance for that, so donât be afraid of doing something wrong. Anyway, if the quality of sound is unsatisfactory, try to change the position of the battery.
· Put the spy earpiece into the ear. Here you should remember that you always have to clean ear canals beforehand. Otherwise, the spy earpiece filter will choke up with earwax and sound will deteriorate significantly. In the worst case the spy earpiece will fail to work.
· Make a call. When you are ready with preparations just make a call and put the cell phone into your pocket. You wonât need it any more. Now the covert communication is established. You can hear what your partner is saying.
· Pull the spy earpiece out. This is very easy to do thanks to a special ejection cord every spy earpiece has. You can see it in any picture.
· Take out the battery. Be careful about pulling out the battery. You have to do it only with the help of a paper pin so that not to damage the spy earpiece. In case you wonât take it out, the battery will discharge.
With the help of the spy earpiece you will never feel embarrassed and confused when speaking in public, writing a test, having an interview or taking an exam. The spy earpiece will help you to feel confident and be successful.
Source - http://osanellona.hubpages.com/hub/How-Does-Spy-Earpiece-Work
The main feature of the spy earpiece is its complete invisibility. First of all, the spy earpiece goes in beige hue that is very close to skin color. So when you insert it into the ear, nobody can even notice it. Besides, the spy earpiece can boast of super tiny dimensions that ensure absolute invisibility of the gadget when it is in the ear.
The good news is the spy earpiece is available on the market in diverse gadget sets. The most popular of them are Bluetooth Set, Watch Set, MP3 Set and Glasses Set. Each one of the sets listed above has an in-built transmitter and a microphone (in the loop for Bluetooth and MP3, in the bow of the glasses and on the reverse side of the watch). Thanks to the transmitter, the gadget gets connected to the cell phone. And thanks to the sensitive microphone your partner will hear your every word even if you whisper. So, as you can see the spy earpiece set consists of the transmitter with an embedded microphone and a spy earpiece with a battery.
It is pretty easy to use the spy earpiece. What you have to do is the following sequence of steps:
· Put the transmitter. If you use the Bluetooth or MP3 spy earpiece set, you are supposed to put on the loop round your neck. Make sure that the loop is properly hidden under your clothes. For Spy earpiece Watch set you put on the watch on your wrist, and for Spy earpiece Glasses set â" just use it like ordinary glasses.
· Insert the battery into the spy earpiece. Every set comes with a detailed guidance for that, so donât be afraid of doing something wrong. Anyway, if the quality of sound is unsatisfactory, try to change the position of the battery.
· Put the spy earpiece into the ear. Here you should remember that you always have to clean ear canals beforehand. Otherwise, the spy earpiece filter will choke up with earwax and sound will deteriorate significantly. In the worst case the spy earpiece will fail to work.
· Make a call. When you are ready with preparations just make a call and put the cell phone into your pocket. You wonât need it any more. Now the covert communication is established. You can hear what your partner is saying.
· Pull the spy earpiece out. This is very easy to do thanks to a special ejection cord every spy earpiece has. You can see it in any picture.
· Take out the battery. Be careful about pulling out the battery. You have to do it only with the help of a paper pin so that not to damage the spy earpiece. In case you wonât take it out, the battery will discharge.
With the help of the spy earpiece you will never feel embarrassed and confused when speaking in public, writing a test, having an interview or taking an exam. The spy earpiece will help you to feel confident and be successful.
Source - http://osanellona.hubpages.com/hub/How-Does-Spy-Earpiece-Work
Thursday, 5 March 2015
What is an Acoustic Transducer?
From Wisegeek.com âWhat is an Acoustic Transducer?â (27 January 2010)
An acoustic transducer is an electrical device that coverts sound wave vibrations into mechanical or electrical energy. They have various practical applications, including sound recording and sound playback. A specialized model, called an ultrasonic acoustic transducer, can be used to measure distance to, as well as the mass of, an object.
Common types of acoustic transducers used in sound recording include microphones, earphones, and guitar pickups. These create electrical energy when moving parts inside the transducer, such as electrical plates or ribbons, are exposed to sound vibrations. The electrical energy produced inside the transducer is sent first to an amplifier.
The amplifier then sends this energy to its final destination, usually a loudspeaker or recording device. The loudspeaker reproduces the sound at a level that the human ear can hear. A recording device will retain the electrical signal information. The recorder will send the stored signal to a loudspeaker during playback.
An ultrasonic acoustic transducer can be used to measure distance or the mass of an object. The most common type is the piezoelectric acoustic transducer. These include a piezoelectric ceramic element that creates and distributes ultrasonic sound waves.
Sound waves travel to an object from a piezoelectric transducer through material called a couplant. The couplant is usually water. Sound waves bounce off the object and return to the transducer in the form of an echo. The time it takes for these echoes to return to the transducer is used to calculate the distance to the object.
Underwater sound navigation and ranging (SONAR) is a common use of an ultrasonic acoustic transducer. SONAR uses directional beams of sound waves. This enables the SONAR operator to determine the direction and distance to an object.
SONAR systems can be active or passive. An active system sends out sound waves and listens for echoes. A passive system listens for noises made by ships, fish, and landmasses.
An electromagnetic acoustic transducer (EMAT) is another form of ultrasonic transducer. Instead of a ceramic element, an electro magnet is the main component of an EMAT. This is a type of non-contact, or non-destructive transducer. Unlike piezoelectric transducers, EMATs do not need a couplant to carry sound waves. Instead, two electromagnetic fields are generated to disburse ultrasonic waves.
EMATs can easily be used almost anywhere since no liquid is needed. For example, EMATs can be used to check for flaws in underground pipes. A downside to EMATs, compared to piezoelectric transducers, is that EMATs create weaker sound fields.
An acoustic transducer is an electrical device that coverts sound wave vibrations into mechanical or electrical energy. They have various practical applications, including sound recording and sound playback. A specialized model, called an ultrasonic acoustic transducer, can be used to measure distance to, as well as the mass of, an object.
Common types of acoustic transducers used in sound recording include microphones, earphones, and guitar pickups. These create electrical energy when moving parts inside the transducer, such as electrical plates or ribbons, are exposed to sound vibrations. The electrical energy produced inside the transducer is sent first to an amplifier.
The amplifier then sends this energy to its final destination, usually a loudspeaker or recording device. The loudspeaker reproduces the sound at a level that the human ear can hear. A recording device will retain the electrical signal information. The recorder will send the stored signal to a loudspeaker during playback.
An ultrasonic acoustic transducer can be used to measure distance or the mass of an object. The most common type is the piezoelectric acoustic transducer. These include a piezoelectric ceramic element that creates and distributes ultrasonic sound waves.
Sound waves travel to an object from a piezoelectric transducer through material called a couplant. The couplant is usually water. Sound waves bounce off the object and return to the transducer in the form of an echo. The time it takes for these echoes to return to the transducer is used to calculate the distance to the object.
Underwater sound navigation and ranging (SONAR) is a common use of an ultrasonic acoustic transducer. SONAR uses directional beams of sound waves. This enables the SONAR operator to determine the direction and distance to an object.
SONAR systems can be active or passive. An active system sends out sound waves and listens for echoes. A passive system listens for noises made by ships, fish, and landmasses.
An electromagnetic acoustic transducer (EMAT) is another form of ultrasonic transducer. Instead of a ceramic element, an electro magnet is the main component of an EMAT. This is a type of non-contact, or non-destructive transducer. Unlike piezoelectric transducers, EMATs do not need a couplant to carry sound waves. Instead, two electromagnetic fields are generated to disburse ultrasonic waves.
EMATs can easily be used almost anywhere since no liquid is needed. For example, EMATs can be used to check for flaws in underground pipes. A downside to EMATs, compared to piezoelectric transducers, is that EMATs create weaker sound fields.
Tuesday, 3 March 2015
Where Are Sepura Radios Used?
For people who are curious where Sepura radios are used, then this article is for you. Sepura is a highly respected company that designs, manufactures and sells radio technology. However, the company is known for providing accessories, like a Sepura radio earpiece to radio networks. The company has gained a reputation to supply radios that are highly secure, feature-rich and durable. In fact, with these so many features, the only real question is - in which situations do Sepura radio are not suitable? The answer is - hardly. Nevertheless, this article is going to enumerate a few popular uses for Sepura radios.
Public Safety
One of the most common uses for Sepura radios is in the field of public safety. There are plenty of reasons for this, but the most compelling one is because of the Sepura's mobile gateway technology. Because of such technology, officers in public safety will be able to communicate with each other no matter the location, even for "dead spots. Sepura radio also comes with a one-of-a-kind noise suppression technology. It's so good at it that even with wailing sirens, you can still hear crystal clear audio. However, if you really want to block-out all the background noises, then Sepura radio earpiece can help you with that.
Seupra also provides radio technologies that are all designed to streamline and increase the functionality of the communications like allowing real-time information sharing with emergency services, the control room and colleagues; also, Sepura provides apps that make using the technology easier. The ability of Sepura radios to withstand a heavy beating makes them very ideal for tough and disaster scenarios. Lastly Sepura radios come with a Man-Down feature, which provides critical help for any officers that might need backup or assistance.
Oil And Gas
Another popular use for Sepura radios is in oil and gas industries, especially offshore installations. These kinds of work environments are considered as âhigh risk", thus worker safety of utmost importance. Therefore, accurate and clear communication is crucial for the safety of all the workers. Sepura radios offer the one of the best radio communications and technologies to provide that another safety layer.
The notable safety features are the Lone Worker and Man-Down. These features are especially designed to ensure safety of the workers and provide immediate help if the situation arises. The radios and accessories are designed in a way so that it can be easily operated even if the user is wearing thick gloves. Sepura radios also feature real-time information authorization access to different areas. This helps protect assets and ensure information security. Also, Sepura radios come with an app specially designed for oil and gas environments as it helps in reducing incidents, liability exposure, promoting safety and full audit-trail.
Sepura is a company that designs, manufactures and sells radio and radio based-technologies from handheld devices, networks to accessories, like the Sepura radio earpiece. Because of the many features, their radios are extensively used in different locations, industries and agencies. The company has put a lot of effort to put features that ensure safety and clear communications, thus it has earned a place in public safety and oil and gas industries.
Public Safety
One of the most common uses for Sepura radios is in the field of public safety. There are plenty of reasons for this, but the most compelling one is because of the Sepura's mobile gateway technology. Because of such technology, officers in public safety will be able to communicate with each other no matter the location, even for "dead spots. Sepura radio also comes with a one-of-a-kind noise suppression technology. It's so good at it that even with wailing sirens, you can still hear crystal clear audio. However, if you really want to block-out all the background noises, then Sepura radio earpiece can help you with that.
Seupra also provides radio technologies that are all designed to streamline and increase the functionality of the communications like allowing real-time information sharing with emergency services, the control room and colleagues; also, Sepura provides apps that make using the technology easier. The ability of Sepura radios to withstand a heavy beating makes them very ideal for tough and disaster scenarios. Lastly Sepura radios come with a Man-Down feature, which provides critical help for any officers that might need backup or assistance.
Oil And Gas
Another popular use for Sepura radios is in oil and gas industries, especially offshore installations. These kinds of work environments are considered as âhigh risk", thus worker safety of utmost importance. Therefore, accurate and clear communication is crucial for the safety of all the workers. Sepura radios offer the one of the best radio communications and technologies to provide that another safety layer.
The notable safety features are the Lone Worker and Man-Down. These features are especially designed to ensure safety of the workers and provide immediate help if the situation arises. The radios and accessories are designed in a way so that it can be easily operated even if the user is wearing thick gloves. Sepura radios also feature real-time information authorization access to different areas. This helps protect assets and ensure information security. Also, Sepura radios come with an app specially designed for oil and gas environments as it helps in reducing incidents, liability exposure, promoting safety and full audit-trail.
Sepura is a company that designs, manufactures and sells radio and radio based-technologies from handheld devices, networks to accessories, like the Sepura radio earpiece. Because of the many features, their radios are extensively used in different locations, industries and agencies. The company has put a lot of effort to put features that ensure safety and clear communications, thus it has earned a place in public safety and oil and gas industries.
Subscribe to:
Posts (Atom)